A heat pipe is a unit designed to transfer heat. Conductivity on a thermal level is combined with phase transitioning in order to cause heat to transfer between two interfaces. This gives individuals throughout the world heat. There are a variety of different types available.
Electronics Cooling Pipes
The pipes for electronic cooling use semiconductors and transistors. These pipes heat up quickly and easily then cool down with the transmissions of cold air.
Aerospace Pipes
Satellites and craft’s in outer space need this type of pipe. They are fitted on shuttles so the consumption of the air density is a better quality.
Heat Exchange Pipes
These are used industrially in factories and power plants to send gas from the heater to the boiler.
Thermosyphon Pipes
Gravity condenses water and turns it into vapor. The transmissions of liquid are easily achieved.
Leading Edge Pipes
Automobiles use this pipe, usually vehicles with hypersonic qualities. Air intake is increased for smoother driving.
Rotating and Revolving Pipes
These pipes have a rotating motor to provide solutions thermally. Vapor is condensed for electric machinery.
Cryogenic Pipes
These run on a low temperature and cool optical instruments that have been placed in space. The sustain a lot of pressure.
Power Flattener Pipes
Heat is condensed in these pipes to enable a level of consistency. Heat fluxes are then shuffled with an evaporator.
Temperature Control Pipes
Temperatures are controlled with a condenser and an evaporator so a steady temperature is achieved. These are effective at the heating of water.
Geometry Control Pipes
The higher flux of heat is dissipated using natural convection into a much lower flux of heat.
For more information, see our aluminum heat-pipe cooling solutions manufacturer page for heat pipe solutions or contact us at 888-999-8499.
